Vesta
English
Source code

ADDSD

Add Scalar Double Precision Floating-Point Values

stableVMJITAOTinstruction

Encodings

OpcodeInstructionOp/En64-bitCompat/LegacyDescription
F2 0F 58 /rADDSD xmm1, xmm2/m64AValidValidAdd the low double precision floating-point value from xmm2/mem to xmm1 and store the result in xmm1.
VEX.LIG.F2.0F.WIG 58 /rVADDSD xmm1, xmm2, xmm3/m64BValidValidAdd the low double precision floating-point value from xmm3/mem to xmm2 and store the result in xmm1.
EVEX.LLIG.F2.0F.W1 58 /rVADDSD xmm1 {k1}{z}, xmm2, xmm3/m64{er}CValidValidAdd the low double precision floating-point value from OR AVX10.1 xmm3/m64 to xmm2 and store the result in xmm1 with writemask k1.

Operand encoding

Each mode is a value of the Op/En column above. It says which field of the encoded instruction carries each operand, in the order they are written, and whether the instruction reads it, writes it or both.

A

  1. modrm.reg lectura y escrituraModRM byte, reg field (bits 5-3)
  2. modrm.rm lecturaModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them

B

  1. modrm.reg escrituraModRM byte, reg field (bits 5-3)
  2. vex.vvvv lecturaVEX prefix, vvvv field (inverted)
  3. modrm.rm lecturaModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them

C

  1. modrm.reg escrituraModRM byte, reg field (bits 5-3)
  2. evex.vvvv lecturaEVEX prefix, vvvv field (inverted)
  3. modrm.rm lecturaModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them

Tupla: Tuple1 Scalar

Measured cost

Loading measurements from arch-data...

Description

Adds the low double precision floating-point values from the second source operand and the first source operand and stores the double precision floating-point result in the destination operand.

The second source operand can be an XMM register or a 64-bit memory location. The first source and destination operands are XMM registers.

128-bit Legacy SSE version: The first source and destination operands are the same. Bits (MAXVL-1:64) of the corresponding destination register remain unchanged.

EVEX and VEX.128 encoded version: The first source operand is encoded by EVEX.vvvv/VEX.vvvv. Bits (127:64) of the XMM register destination are copied from corresponding bits in the first source operand. Bits (MAXVL-1:128) of the destination register are zeroed.

EVEX version: The low quadword element of the destination is updated according to the writemask.

Software should ensure VADDSD is encoded with VEX.L=0. Encoding VADDSD with VEX.L=1 may encounter unpredictable behavior across different processor generations.

Operation

VADDSD (EVEX Encoded Version)

IF (EVEX.b = 1) AND SRC2 *is a register*

     THEN

     SET_ROUNDING_MODE_FOR_THIS_INSTRUCTION(EVEX.RC);

     ELSE

     SET_ROUNDING_MODE_FOR_THIS_INSTRUCTION(MXCSR.RC);

FI;

IF k1[0] or *no writemask*

     THEN DEST[63:0] := SRC1[63:0] + SRC2[63:0]

     ELSE

     IF *merging-masking*                 ; merging-masking

           THEN *DEST[63:0] remains unchanged*

           ELSE                           ; zeroing-masking

           THEN DEST[63:0] := 0

     FI;

FI;

DEST[127:64] := SRC1[127:64]

DEST[MAXVL-1:128] := 0

VADDSD (VEX.128 Encoded Version)
DEST[63:0] := SRC1[63:0] + SRC2[63:0]
DEST[127:64] := SRC1[127:64]
DEST[MAXVL-1:128] := 0

ADDSD (128-bit Legacy SSE Version)
DEST[63:0] := DEST[63:0] + SRC[63:0]
DEST[MAXVL-1:64] (Unmodified)

Intel C/C++ compiler intrinsics

VADDSD __m128d _mm_mask_add_sd (__m128d s, __mmask8 k, __m128d a, __m128d b);
VADDSD __m128d _mm_maskz_add_sd (__mmask8 k, __m128d a, __m128d b);
VADDSD __m128d _mm_add_round_sd (__m128d a, __m128d b, int);
VADDSD __m128d _mm_mask_add_round_sd (__m128d s, __mmask8 k, __m128d a, __m128d b, int);
VADDSD __m128d _mm_maskz_add_round_sd (__mmask8 k, __m128d a, __m128d b, int);
ADDSD __m128d _mm_add_sd (__m128d a, __m128d b);

SIMD Floating-Point Exceptions

Overflow, Underflow, Invalid, Precision, Denormal.

Other Exceptions

VEX-encoded instruction, see Table 2-20, "Type 3 Class Exception Conditions." EVEX-encoded instruction, see Table 2-49, "Type E3 Class Exception Conditions."

Sources