HSUBPS

Packed Single Precision Floating-Point Horizontal Subtract

stableVMJITAOTinstruction

Encodings

Operand encoding

Each mode is a value of the Op/En column above. It says which field of the encoded instruction carries each operand, in the order they are written, and whether the instruction reads it, writes it or both.

Measured cost

Description#

Subtracts the single precision floating-point value in the second dword of the destination operand from the first dword of the destination operand and stores the result in the first dword of the destination operand.

Subtracts the single precision floating-point value in the fourth dword of the destination operand from the third dword of the destination operand and stores the result in the second dword of the destination operand.

Subtracts the single precision floating-point value in the second dword of the source operand from the first dword of the source operand and stores the result in the third dword of the destination operand.

Subtracts the single precision floating-point value in the fourth dword of the source operand from the third dword of the source operand and stores the result in the fourth dword of the destination operand.

In 64-bit mode, use of the REX.R prefix permits this instruction to access additional registers (XMM8-XMM15).

See Figure 3-18 for HSUBPS; see Figure 3-19 for VHSUBPS.

HSUBPS xmm1, xmm2/m128

[127:96] [95:64] [63:32] [31:0] xmm2/ m128

[127:96] [95:64] [63:32] [31:0] xmm1

xmm2/m128 xmm2/m128 xmm1[95:64] - xmm1[31:0] - RESULT: [95:64] - xmm2/ [31:0] - xmm2/ xmm1[127:96] xmm1[63:32] xmm1 m128[127:96] m128[63:32]

                                                                      [63:32]          [31:0]
    [127:96]            [95:64]

OM15996

Figure 3-18. HSUBPS--Packed Single Precision Floating-Point Horizontal Subtract

SRC1 X7 X6 X5 X4 X3 X2 X1 X0

SRC2 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0

DEST Y6-Y7 Y4-Y5 X6-X7 X4-X5 Y2-Y3 Y0-Y1 X2-X3 X0-X1

Figure 3-19. VHSUBPS Operation

128-bit Legacy SSE version: The second source can be an XMM register or an 128-bit memory location. The destination is not distinct from the first source XMM register and the upper bits (MAXVL-1:128) of the corresponding YMM register destination are unmodified. VEX.128 encoded version: the first source operand is an XMM register or 128-bit memory location. The destination operand is an XMM register. The upper bits (MAXVL-1:128) of the corresponding YMM register destination are zeroed. VEX.256 encoded version: The first source operand is a YMM register. The second source operand can be a YMM register or a 256-bit memory location. The destination operand is a YMM register.

Operation#

HSUBPS (128-bit Legacy SSE Version)
DEST[31:0] := SRC1[31:0] - SRC1[63:32]
DEST[63:32] := SRC1[95:64] - SRC1[127:96]
DEST[95:64] := SRC2[31:0] - SRC2[63:32]
DEST[127:96] := SRC2[95:64] - SRC2[127:96]
DEST[MAXVL-1:128] (Unmodified)

VHSUBPS (VEX.128 Encoded Version)
DEST[31:0] := SRC1[31:0] - SRC1[63:32]
DEST[63:32] := SRC1[95:64] - SRC1[127:96]
DEST[95:64] := SRC2[31:0] - SRC2[63:32]
DEST[127:96] := SRC2[95:64] - SRC2[127:96]
DEST[MAXVL-1:128] := 0

VHSUBPS (VEX.256 Encoded Version)
DEST[31:0] := SRC1[31:0] - SRC1[63:32]
DEST[63:32] := SRC1[95:64] - SRC1[127:96]
DEST[95:64] := SRC2[31:0] - SRC2[63:32]
DEST[127:96] := SRC2[95:64] - SRC2[127:96]
DEST[159:128] := SRC1[159:128] - SRC1[191:160]
DEST[191:160] := SRC1[223:192] - SRC1[255:224]
DEST[223:192] := SRC2[159:128] - SRC2[191:160]
DEST[255:224] := SRC2[223:192] - SRC2[255:224]

Intel C/C++ compiler intrinsics#

HSUBPS __m128 _mm_hsub_ps(__m128 a, __m128 b);
VHSUBPS __m256 _mm256_hsub_ps (__m256 a, __m256 b);
Exceptions When the source operand is a memory operand, the operand must be aligned on a 16-byte boundary or a general- protection exception (#GP) will be generated.;

Numeric Exceptions#

Overflow, Underflow, Invalid, Precision, Denormal.

Other Exceptions#

See Table 2-19, "Type 2 Class Exception Conditions."

Sources

• This instruction in the Intel manual
• Latency and throughput per microarchitecture