MOVMSKPD
Extract Packed Double Precision Floating-Point Sign Mask
stableVMJITAOTinstruction
Encodings
| Opcode | Instruction | Op/En | 64-bit | Compat/Legacy | Description |
|---|---|---|---|---|---|
66 0F 50 /r | MOVMSKPD reg, xmm | RM | Valid | Valid | Extract 2-bit sign mask from xmm and store in reg. The upper bits of r32 or r64 are filled with zeros. |
VEX.128.66.0F.WIG 50 /r | VMOVMSKPD reg, xmm2 | RM | Valid | Valid | Extract 2-bit sign mask from xmm2 and store in reg. The upper bits of r32 or r64 are zeroed. |
VEX.256.66.0F.WIG 50 /r | VMOVMSKPD reg, ymm2 | RM | Valid | Valid | Extract 4-bit sign mask from ymm2 and store in reg. The upper bits of r32 or r64 are zeroed. |
Operand encoding
Each mode is a value of the Op/En column above. It says which field of the encoded instruction carries each operand, in the order they are written, and whether the instruction reads it, writes it or both.
RM
modrm.regescrituraModRM byte, reg field (bits 5-3)modrm.rmlecturaModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them
Measured cost
Loading measurements from arch-data...
Description
Extracts the sign bits from the packed double precision floating-point values in the source operand (second operand), formats them into a 2-bit mask, and stores the mask in the destination operand (first operand). The source operand is an XMM register, and the destination operand is a general-purpose register. The mask is stored in the 2 low-order bits of the destination operand. Zero-extend the upper bits of the destination.
In 64-bit mode, the instruction can access additional registers (XMM8-XMM15, R8-R15) when used with a REX.R prefix. The default operand size is 64-bit in 64-bit mode.
128-bit versions: The source operand is a YMM register. The destination operand is a general purpose register.
VEX.256 encoded version: The source operand is a YMM register. The destination operand is a general purpose register.
Note: In VEX-encoded versions, VEX.vvvv is reserved and must be 1111b, otherwise instructions will #UD.
Operation
(V)MOVMSKPD (128-bit Versions)
DEST[0] := SRC[63]
DEST[1] := SRC[127]
IF DEST = r32
THEN DEST[31:2] := 0;
ELSE DEST[63:2] := 0;
FI
VMOVMSKPD (VEX.256 Encoded Version)
DEST[0] := SRC[63]
DEST[1] := SRC[127]
DEST[2] := SRC[191]
DEST[3] := SRC[255]
IF DEST = r32
THEN DEST[31:4] := 0;
ELSE DEST[63:4] := 0;
FIIntel C/C++ compiler intrinsics
MOVMSKPD int _mm_movemask_pd ( __m128d a) VMOVMSKPD _mm256_movemask_pd(__m256d a);SIMD Floating-Point Exceptions
None.
Other Exceptions
See Table 2-24, "Type 7 Class Exception Conditions," additionally:
#UD If VEX.vvvv 1111B.