Vesta
English
Source code

MOVNTPD

Store Packed Double Precision Floating-Point Values Using Non-Temporal Hint

stableVMJITAOTinstruction

Encodings

OpcodeInstructionOp/En64-bitCompat/LegacyDescription
66 0F 2B /rMOVNTPD m128, xmm1AValidValidMove packed double precision values in xmm1 to m128 using non-temporal hint.
VEX.128.66.0F.WIG 2B /rVMOVNTPD m128, xmm1AValidValidMove packed double precision values in xmm1 to m128 using non-temporal hint.
VEX.256.66.0F.WIG 2B /rVMOVNTPD m256, ymm1AValidValidMove packed double precision values in ymm1 to m256 using non-temporal hint.
EVEX.128.66.0F.W1 2B /rVMOVNTPD m128, xmm1BValidValidMove packed double precision values in xmm1 to m128 AVX512F) OR AVX10.1 using non-temporal hint.
EVEX.256.66.0F.W1 2B /rVMOVNTPD m256, ymm1BValidValidMove packed double precision values in ymm1 to m256 AVX512F) OR AVX10.1 using non-temporal hint.
EVEX.512.66.0F.W1 2B /rVMOVNTPD m512, zmm1 Op/En Tuple Type A N/A B Full MemBValidValidMove packed double precision values in zmm1 to m512 OR AVX10.1 using non-temporal hint. Instruc tion Operand En coding1 Operand 1 Operan d 2 Operand 3 Operand 4 Mo dRM:r/m (w) ModRM:reg (r) N/A N/A Mo dRM:r/m (w) ModRM:reg (r) N/A N/A

Operand encoding

Each mode is a value of the Op/En column above. It says which field of the encoded instruction carries each operand, in the order they are written, and whether the instruction reads it, writes it or both.

A

  1. modrm.rm escrituraModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them
  2. modrm.reg lecturaModRM byte, reg field (bits 5-3)

B

  1. modrm.rm escrituraModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them
  2. modrm.reg lecturaModRM byte, reg field (bits 5-3)

Tupla: Full Mem

Measured cost

Loading measurements from arch-data...

Description

Moves the packed double precision floating-point values in the source operand (second operand) to the destination operand (first operand) using a non-temporal hint to prevent caching of the data during the write to memory. The source operand is an XMM register, YMM register or ZMM register, which is assumed to contain packed double precision, floating-pointing data. The destination operand is a 128-bit, 256-bit or 512-bit memory location. The memory operand must be aligned on a 16-byte (128-bit version), 32-byte (VEX.256 encoded version) or 64-byte (EVEX.512 encoded version) boundary otherwise a general-protection exception (#GP) will be generated.

The non-temporal hint is implemented by using a write combining (WC) memory type protocol when writing the data to memory. Using this protocol, the processor does not write the data into the cache hierarchy, nor does it fetch the corresponding cache line from memory into the cache hierarchy. The memory type of the region being written to can override the non-temporal hint, if the memory address specified for the non-temporal store is in an uncacheable (UC) or write protected (WP) memory region. For more information on non-temporal stores, see "Caching of Temporal vs. Non-Temporal Data" in Chapter 10 in the IA-32 Intel Architecture Software Developer's Manual, Volume 1.

Because the WC protocol uses a weakly-ordered memory consistency model, a fencing operation implemented with the SFENCE or MFENCE instruction should be used in conjunction with MOVNTPD instructions if multiple processors might use different memory types to read/write the destination memory locations.

Note: VEX.vvvv and EVEX.vvvv are reserved and must be 1111b, VEX.L must be 0; otherwise instructions will

#UD.

Operation

VMOVNTPD (EVEX Encoded Versions)
VL = 128, 256, 512
DEST[VL-1:0] := SRC[VL-1:0]

1. ModRM.MOD != 011B


DEST[MAXVL-1:VL] := 0

MOVNTPD (Legacy and VEX Versions)
DEST := SRC

Intel C/C++ compiler intrinsics

VMOVNTPD void _mm512_stream_pd(double * p, __m512d a);
VMOVNTPD void _mm256_stream_pd (double * p, __m256d a);
MOVNTPD void _mm_stream_pd (double * p, __m128d a);

SIMD Floating-Point Exceptions

None.

Other Exceptions

Non-EVEX-encoded instruction, see Exceptions Type1.SSE2 in Table 2-18, "Type 1 Class Exception Conditions."

EVEX-encoded instruction, see Table 2-47, "Type E1NF Class Exception Conditions."

Additionally:

#UD                    If VEX.vvvv != 1111B or EVEX.vvvv != 1111B.

Sources