Vesta
English
Source code

PSLLDQ

Shift Double Quadword Left Logical

stableVMJITAOTinstruction

Encodings

OpcodeInstructionOp/En64-bitCompat/LegacyDescription
66 0F 73 /7 ibPSLLDQ xmm1, imm8AValidValidShift xmm1 left by imm8 bytes while shifting in 0s.
VEX.128.66.0F.WIG 73 /7 ibVPSLLDQ xmm1, xmm2, imm8BValidValidShift xmm2 left by imm8 bytes while shifting in 0s and store result in xmm1.
VEX.256.66.0F.WIG 73 /7 ibVPSLLDQ ymm1, ymm2, imm8BValidValidShift ymm2 left by imm8 bytes while shifting in 0s and store result in ymm1.
EVEX.128.66.0F.WIG 73 /7 ibVPSLLDQ xmm1,xmm2/ m128, imm8CValidValidShift xmm2/m128 left by imm8 bytes while AVX512BW) OR AVX10.1 shifting in 0s and store result in xmm1.
EVEX.256.66.0F.WIG 73 /7 ibVPSLLDQ ymm1, ymm2/m256, imm8CValidValidShift ymm2/m256 left by imm8 bytes while AVX512BW) OR AVX10.1 shifting in 0s and store result in ymm1.
EVEX.512.66.0F.WIG 73 /7 ibVPSLLDQ zmm1, zmm2/m512, imm8CValidValidShift zmm2/m512 left by imm8 bytes while OR AVX10.1 shifting in 0s and store result in zmm1.

Operand encoding

Each mode is a value of the Op/En column above. It says which field of the encoded instruction carries each operand, in the order they are written, and whether the instruction reads it, writes it or both.

A

  1. modrm.rm lectura y escrituraModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them
  2. imm8immediate byte after the instruction

B

  1. vex.vvvv escrituraVEX prefix, vvvv field (inverted)
  2. modrm.rm lecturaModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them
  3. imm8immediate byte after the instruction

C

  1. evex.vvvv escrituraEVEX prefix, vvvv field (inverted)
  2. modrm.rm lecturaModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them
  3. imm8immediate byte after the instruction

Tupla: Full Mem

Measured cost

Loading measurements from arch-data...

Description

Shifts the destination operand (first operand) to the left by the number of bytes specified in the count operand (second operand). The empty low-order bytes are cleared (set to all 0s). If the value specified by the count operand is greater than 15, the destination operand is set to all 0s. The count operand is an 8-bit immediate.

128-bit Legacy SSE version: The source and destination operands are the same. Bits (MAXVL-1:128) of the corresponding YMM destination register remain unchanged.

VEX.128 encoded version: The source and destination operands are XMM registers. Bits (MAXVL-1:128) of the destination YMM register are zeroed.

VEX.256 encoded version: The source operand is YMM register. The destination operand is an YMM register. Bits (MAXVL-1:256) of the corresponding ZMM register are zeroed. The count operand applies to both the low and high 128-bit lanes.

EVEX encoded versions: The source operand is a ZMM/YMM/XMM register or a 512/256/128-bit memory location. The destination operand is a ZMM/YMM/XMM register. The count operand applies to each 128-bit lanes.

Operation

VPSLLDQ (EVEX.U1.512 Encoded Version)
TEMP := COUNT
IF (TEMP > 15) THEN TEMP := 16; FI
DEST[127:0] := SRC[127:0] << (TEMP * 8)
DEST[255:128] := SRC[255:128] << (TEMP * 8)
DEST[383:256] := SRC[383:256] << (TEMP * 8)
DEST[511:384] := SRC[511:384] << (TEMP * 8)
DEST[MAXVL-1:512] := 0

VPSLLDQ (VEX.256 and EVEX.256 Encoded Version)
TEMP := COUNT
IF (TEMP > 15) THEN TEMP := 16; FI
DEST[127:0] := SRC[127:0] << (TEMP * 8)
DEST[255:128] := SRC[255:128] << (TEMP * 8)
DEST[MAXVL-1:256] := 0

VPSLLDQ (VEX.128 and EVEX.128 Encoded Version)
TEMP := COUNT
IF (TEMP > 15) THEN TEMP := 16; FI
DEST := SRC << (TEMP * 8)
DEST[MAXVL-1:128] := 0

PSLLDQ(128-bit Legacy SSE Version)
TEMP := COUNT
IF (TEMP > 15) THEN TEMP := 16; FI
DEST := DEST << (TEMP * 8)
DEST[MAXVL-1:128] (Unmodified)

Intel C/C++ compiler intrinsics

(V)PSLLDQ __m128i _mm_slli_si128 ( __m128i a, int imm) VPSLLDQ __m256i _mm256_slli_si256 ( __m256i a, const int imm) VPSLLDQ __m512i _mm512_bslli_epi128 ( __m512i a, const int imm);

Flags affected

None.

Numeric Exceptions

None.

Other Exceptions

Non-EVEX-encoded instruction, see Table 2-24, "Type 7 Class Exception Conditions." EVEX-encoded instruction, see Exceptions Type E4NF.nb in Table 2-52, "Type E4NF Class Exception Conditions."

Sources