Vesta
English
Source code

VP4DPWSSDS

Dot Product of Signed Words With Dword Accumulation and Saturation

stableVMJITAOTinstruction

Encodings

OpcodeInstructionOp/En64-bitCompat/LegacyDescription
EVEX.512.F2.0F38.W0 53 /rVP4DPWSSDS zmm1{k1}{z}, zmm2+3, m128AValidValidMultiply signed words from source register block indicated by zmm2 by signed words from m128 and accumulate the resulting dword results with signed saturation in zmm1.

Operand encoding

Each mode is a value of the Op/En column above. It says which field of the encoded instruction carries each operand, in the order they are written, and whether the instruction reads it, writes it or both.

A

  1. Tuple1_4X
  2. modrm.reg lectura y escrituraModRM byte, reg field (bits 5-3)
  3. evex.vvvv lecturaEVEX prefix, vvvv field (inverted)
  4. modrm.rm lecturaModRM byte, r/m field (bits 2-0); with the SIB byte and the displacement when the mod field asks for them

Measured cost

Loading measurements from arch-data...

Description

This instruction computes 4 sequential register source-block dot-products of two signed word operands with doubleword accumulation and signed saturation. The memory operand is sequentially selected in each of the four steps.

In the above box, the notation of "+3" is used to denote that the instruction accesses 4 source registers based on that operand; sources are consecutive, start in a multiple of 4 boundary, and contain the encoded register operand.

This instruction supports memory fault suppression. The entire memory operand is loaded if any bit of the lowest 16-bits of the mask is set to 1 or if a "no masking" encoding is used.

The tuple type Tuple1_4X implies that four 32-bit elements (16 bytes) are referenced by the memory operation portion of this instruction.

Operation

src_reg_id is the 5 bit index of the vector register specified in the instruction as the src1 register.

VP4DPWSSDS dest, src1, src2
(KL,VL) = (16,512)
N := 4

ORIGDEST := DEST
src_base := src_reg_id & ~ (N-1) // for src1 operand

FOR i := 0 to KL-1:
    IF k1[i] or *no writemask*:
         FOR m := 0 to N-1:
               t := SRC2.dword[m]
               p1dword := reg[src_base+m].word[2*i] * t.word[0]
               p2dword := reg[src_base+m].word[2*i+1] * t.word[1]
               DEST.dword[i] := SIGNED_DWORD_SATURATE(DEST.dword[i] + p1dword + p2dword)
    ELSE IF *zeroing*:
         DEST.dword[i] := 0
    ELSE
         DEST.dword[i] := ORIGDEST.dword[i]

DEST[MAX_VL-1:VL] := 0

Intel C/C++ compiler intrinsics

VP4DPWSSDS __m512i _mm512_4dpwssds_epi32(__m512i, __m512ix4, __m128i *);
VP4DPWSSDS __m512i _mm512_mask_4dpwssds_epi32(__m512i, __mmask16, __m512ix4, __m128i *);
VP4DPWSSDS __m512i _mm512_maskz_4dpwssds_epi32(__mmask16, __m512i, __m512ix4, __m128i *);

SIMD Floating-Point Exceptions

None.

Other Exceptions

See Type E4; additionally:

#UD               If the EVEX broadcast bit is set to 1.
#UD               If the MODRM.mod = 0b11.

Sources